QPR 6690 10 Gallon Melter Applicator
ASSEMBLY INSTRUCTIONS
16 of 18
7322 Bonnyshire Drive
Chattanooga, TN 37416
September 2015
Step 6B
Attach the valve control rod
*Slide the rod handle through the OUTSIDE hole of the main handle bar.
*This rod has a spring at the top of the handle.
*Bolt the base of the rod to the valve plate. The nut and locking nut should be
on the outside of the unit for easy adjustment.
*NOTE: There are three washers for this piec: One for the bolt head and
two for the nut side. There is also a locking nut for this attachment.
Insert valve control rod through
outside hole on main handle bar.
Position hole attachment point on the valve plate. Inside washer 1, outside
washers 1 and 2, outside nut 1 and outside locking nut 2.
