QP-748MI User Manual
Version 1.0
9
Wall Mounting
a.
Remove the DIN-Rail bracket.
b.
Screw the wall mount kits to the switch.
I
NSTALLATION
S
TEPS
1.
Unpack
The switch is well packed and shipped to our customers. Unpack it from the box.
2.
Check Content Items
Please make sure all the items listed in the "
Package Check List
" are in the box.
3.
Mounting
The DIN-Rail is screwed on the switch by default. If the DIN-Rail is not screwed to the switch, refer to
the "
DIN-Rail Mounting
" section to install it manually.
The Wall mount brackets are optional items. If you need the wall mount brackets, contact us for
assistance. To install the switch on the wall, refer to the "
Wall Mounting
" section.
4.
Power On
To power on the switch, users must prepare a power supply and wire the power input. Refer to the
"
Wiring Power Inputs
" section.
The power LEDs are described in the "
LED Instruction
" section.
5.
Connect
To connect to the switch, users need a
RJ45 cable
. Insert the RJ45 cable into one of the switch ports
and insert the other end to the host such as PC.
The link LEDs are described in the "
LED Instruction
" section.
6.
Check LEDs
We recommend the users to check the status of LEDs in the "
LED Instruction
" section. If all the LEDs
are in the normal state, the installation is completed.
