December 2022 Rev 4.0 | Subject to change without notice
17 of 20
USER’S GUIDE UG145
GUI Installation
1. Get GUI files from the Qorvo website
2. Plug the USB-TO-I2C dongle into a free USB port.
3. Follow the instructions in the “How to install driver for dongle” folder.
4. Double click on the ActiveGUI.exe to start the ACT41000 GUI.
GUI Overview
The GUI has 2 basic function buttons allocated in top-left of the Tool Bar which are Read and Write I
2
C. The GUI contains
2 setting modes: Basic Mode and Advanced Mode. In Basic Mode screen it displays basic user programmable configuration
options are programmed using the drop-down boxes or check boxes. Advanced Mode contains the button text for changing
setting for every single bit.
Basic Mode
The following figure shows the GUI in basic mode. This mode allows the user to easily change one or more IC settings.
Advanced Mode
Click the “Advanced Mode” button in the left of the GUI screen to see all available user programmable options. With
Advanced Mode, additional user programmable features can be selected using the button text. In the left side of the
Advanced Mode Screen, click on the Tiles Selector to display the register to view or change. Then change a register one
bit at a time by clicking on the desired bit. The value of the bit is display right next to the bit-name button.
Note that the far right side of the screen contains a scroll down button to scroll down to additional registers since the Tile
Screen can only display up to 8 bytes at once.
Содержание ACT41000EVK1-104
Страница 3: ...December 2022 Rev 4 0 Subject to change without notice 3 of 20 www qorvo com USER S GUIDE UG145...
Страница 8: ...December 2022 Rev 4 0 Subject to change without notice 8 of 20 www qorvo com USER S GUIDE UG145...
Страница 9: ...December 2022 Rev 4 0 Subject to change without notice 9 of 20 www qorvo com USER S GUIDE UG145...
Страница 18: ...December 2022 Rev 4 0 Subject to change without notice 18 of 20 www qorvo com USER S GUIDE UG145...
