Qorvo ACT41000EVK1-104, Руководство пользователя

Страница: 1 / 20

December 2022 Rev 4.0 | Subject to change without notice 1 of 20
www.qorvo.com
USER’S GUIDE UG145
ACT41000EVK1-104 User’s Guide
Description
This document describes the characteristics and operation of the Qorvo ACT41000EVK1-104 evaluation kit (EVK). It provides setup
and operation instructions, schematic, layout, BOM, and test data. This EVK demonstrates the ACT41000-104T power management IC.
Other ACT41000QIxxx options can be evaluated on this EVK by replacing the IC and any other necessary components.
Features
The EVK can be used as a standalone board if desired. However, to access the internal registers and to take full advantage of the IC’s
capability, the user must connect the EVK to a PC with Qorvo’s USB-TO-I2C interface dongle and use the GUI software. The EVK
provides full access to each converter’s input and output voltage, as well as all the digital control signals. This gives the user the
flexibility to configure the EVK to match their real-world system
Figure 1. EVK Picture
EVK Contents
The ACT41000EVK1-104 evaluation kit comes with the following items:
•
EVK assembly
•
USB-TO-I2C dongle
•
Dongle
•
Custom 4-pin connector that connects the USB-TO-I2C dongle to the EVK assembly