Sign-in-China.com
Online Wholesale for AD & Signage Products
Learn More >>
- 27 -
VIII. Maintenance
1.
Only experienced operator could open the cabinet, be noted following measures;
2. Don’t use abrasive cleaner to clean the machine surface.
3.
Check the rotation parts regularly and fill high-temperature grease to lubricate the two
bearings of heating rollers.
4. Do not wash the machine with water. This can damage the electrical circuits, cause
electrical shock or corrosion.
5. During maintenance, don’t run the machine
6. During maintenance, don't change, move and dismantle the safety parts. Make sure the
safety parts before using.
7. Cut the power supply before dismantling and assembly.
8.1 Maintenance of rollers
The main rollers are the crucial parts of the machine. They directly relate to the output
quality of lamination. Please make maintenance regularly.
1. Lift the upper rollers after work to prevent deformation of rollers.
2. Make sure the knife or sharp items will not scratch the rollers. Lift the
3. To extend the lifetime of the rollers, please ensure the rollers are clean. please remove
the adhesive residue by a piece of flannelette with alcohol, detergent or eraser.
4.
Please remove the adhesive residue by a piece of flannelette with alcohol, detergent or
eraser.
Stop heat ing when wiping rollers and be sure that temperature is less than 40
degrees Celsius (104
℉
).
Gently wipe the rotat ing rollers, and avoid concentrat ion of wiping one point to
prevent partial damage roller surface.
Clean up the residual glue on the rollers, otherwise, it will affect the effect of
laminating.
Roller replacement
1.
Open cabinet on both sides;
2.
Remove the heater wiring, the machine should be power off first;
3.
Remove the gear;
