52
< Wireless Setup>
Wireless LAN: The default value is “Enable”
SSID: SSID string, max. Length is 32 bytes.
SSID Broadcast: The default value is “Enable”
Channel: to set fixed channel or Auto. The “Auto” means after power
on WIPS
2
TWP-1500, it will scan all of wireless channel and select clear
one channel automatically.
Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit
or 128bit in ASCII or HEX string.
Key: If Encryption is enabled, you have to set key value according to
the encryption mode you selected.
Channel Bandwidth: select from 20M or Auto (40M/20M)
< AP Client>
Connect to Existing AP: Input the SSID of Home WiFi AP you want to
connect.
Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit
or 128bit in ASCII or HEX string.
Key: If Encryption is enabled, you have to set key value according to
the encryption mode you selected.
Press Apply button, and follow the reboot instruction to make it work.
< Host Name and Domain Name>
Host Name: It will use the same name as SSID for the device host
name
Domain Name: You can also enter the domain name of this device if
there is DNS server available.
< Gatekeeper>
Gatekeeper is designed for ensuring the enterprise network security within
WIPS
2
TWP-1500 box
All Block can block Guest Users(through wireless) to access all office
network(LAN),
All Allow can pass Guest Users(through wireless) to access all office
network
Internet Only can block Guest Users (through wireless) from office
network (LAN) but still reserve internet connection capability.
< SNMP >
Enable or disable SNMP service
User Name: configure the user name to manage this device through
SNMP
Auth Password: configure the Auth password
