Qomo Infrared Interactive Whiteboard, Руководство пользователя, Страница: 6 / 17

6
1. Set four holes on the wall based on indicated whiteboard size;(Hole size:
ø=12mm
，
Height=60mm)
2. Secure the expansion bolts (M8*60mm) into the four holes and use nuts to
tighten firmly into wall; (Keep nuts 5mm with Spring Washer)
3. Align the Wall ‐ mounting Brackets onto the bolts; make sure the Wall ‐ mounting
Bracket holes should be fixed between the Spring Washer and and nuts.
4. Check and screw the nuts.
Interactive System Construction
1. Make sure the whiteboard has been well fixed before interactive system
construction.
2. Adjust the corresponding position between projector and whiteboard so that the
entire image projected is within the whiteboard writing area.
3. Connect the USB cable into the whiteboard USB port. Make sure to use the USB
cable in the box instead of others.
4. Connect the other end of USB cable computer USB interface.
5. Connect computer with projector.