QNO 2WAN 3LAN, Руководство пользователя

Страница: 67 / 106

2WAN 3LAN VPN QoS Security Router
62
Management
：
： ：
：
drop-down menu, press – Service Management to add the new
service.
From the pop-up window, enter a service name and
communications protocol and port, and then click the “Add to
list” button to add the new service.
Log
： ： ： ：
No Log
：
There will be no log record.
Create Log when matched ： Event will be recorded in the log.
Interface ： ： ： ：
Select the source port whether users are permitted or not (for
example: LAN, WAN1, WAN2 or Any). Select from the
drop-down menu.
Source IP
： ： ： ：
Select the source IP range (for example: Any, Single, Range, or
preset IP group name). If Single or Range is selected, please
enter a single IP address or an IP address within a session.
Dest. IP
：
： ：
：
Select the destination IP range (such as Any, Single, Range, or
preset IP group name) If Single or Range is selected; please
enter a single IP address or an IP address within a session.
Scheduling ： ： ： ：
Select “Always” to apply the rule on a round-the-clock basis.
Select “from”, and the operation will run according to the
defined time.
Apply this rule ： ： ： ：
Select " Always " to apply the rule on a round-the-clock basis.
If “ From ” is selected, the activation time is introduced as below
… to … ： ： ： ：
This control rule has time limitation. The setting method is in
24-hour format, such as 08:00 ~ 18:00 (8 a.m. to 6 p.m.)
Day Control
：
： ：
：
” Everyday ” means this period of time will be under control
everyday. If users only certain days of a week should be under
control, users may select the desired days directly.
Apply
：
： ：
：
Click “Apply” to save the configuration.
Delete ： ： ： ：
Click the “ Cancel ” button to cancel the modification. This only
works before “ Apply ” is clicked.