Qnergy PowerGen 5650 Series, Руководство по установке и эксплуатации

Страница: 63 / 194

Q
NERGY
L
YNX
S
OFTWARE
51
Figure 6-44 QEC, Config, Battery Capacity
Table 6-37 QEC, Config, Output A/B/C
Control/Indication Description
Type Boost Rectifier Input – N/A
Passive Input – N/A
Real Output – source-only output (typically used for DC
output)
Reactive – source-sink output (typically used for AC output)
Options Enable – Select if output is used
Aux – N/A
Priority – Set if output requires priority over the other
outputs when total available power is insufficient to support
all loads
Mirrored – (Output A only) Set if Output B is 180˚ from Output
A. This option syncs the control between the two outputs to
provide a combined, split-phase output.
Current Type AC or DC output
Voltage Desired output voltage (V rms)
Maximum Current Maximum continuous output current (A rms)
Frequency Output voltage frequency (Hz)
Phase Relative phase shift (°)
Table 6-38 QEC, Config, Battery Capacity
Control/Indication Description
Battery Capacity PowerGen internal 12V battery bank size (Ah)