QNAP TS-h77XU-RP Series, Руководство пользователя

Страница: 54 / 75

Installation methods Steps
Manual installation a. Click Manual Installation .
The Install Firmware window appears.
b. Click Browse .
The upload file window appears.
c. Select file.
d. Click Open .
Starts firmware installation.
Skip a. Click Skip .
Skips firmware installation.
7. Specify the following information
• NAS name : Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
• Password : Specify an administrator password with 1 to 64 characters. The password supports all
ASCII characters.
8. Click Next .
9. Specify the time zone, date, and time.
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
10. Click Next .
The Configure the network settings screen appears.
11. Select Obtain an IP address automatically (DHCP) .
12. Click Next .
The Cross-platform file transfer service screen appears.
13. Select the types of devices that you will use to access shared folders on the NAS.
14. Click Next .
15. Review the settings.
16. Click Apply .
A confirmation message appears.
Warning
Clicking Yes deletes all data on the drive before installing QuTS hero.
17. Click Yes .
• The QuTS hero installation progress bar appears.
• QuTS hero is installed.
Note
It may take a couple of minutes to complete QuTS hero installation.
TS-hx77XU-RP User Guide
Installation and Configuration 53