QNAP TS-977XU-RP Скачать руководство пользователя

Страница: 7 / 56

Component

TS-977XU

TS-977XU-RP

Form factor

1U Rackmount

Dimensions (H x W x D)

• TS-977XU: 43.3 x 482.6 x 484.15 mm

(1.70 x 19 x 19.06 in)

• TS-977XU-RP: 43.3 x 482.6 x 505.54 mm

(1.70 x 19 x 19.98 in)

Net weight

• TS-977XU: 7.44 kg (15.43 lbs)

• TS-977XU-RP: 8.62 kg (19 lbs)

Others
Rail compatibility

RAIL-B02

Note

• Rail kits are not included with the

NAS and must be purchased
separately. For details, contact an
authorized reseller or go to

http://

shop.qnap.com

• Information on rail kit installation can

be found in the installation guide
included in the rail kit package.

Power supply unit

• TS-977XU: 250W, 100-240V AC, 50/60Hz

• TS-977XU-RP: 2 x 300W, 100-240V AC,

50/60Hz

Warning

To reduce the risk of fire or electric
shock, ensure that you only connect the
power cord to a properly grounded
electrical outlet.

System battery

CR2032 lithium battery (3V, 225 mAh)

Sound level

• TS-977XU: 39.2 db(A)

• TS-977XU-RP: 43.8 db(A)

Note

The sound level was tested at a
bystander position, which is within one
meter of the NAS. The test NAS
operated at low speed with the
maximum number of drives installed.

Fans

System: 3 x 40 mm, 12V DC fan

Operating temperature

0˚C to 40˚C (32˚F to 104˚F)

Relative humidity

• Non-condensing relative humidity: 5% to 95%

• Wet-bulb temperature: 27˚C (80.6˚F)

TS-x77XU User Guide

Product Overview

Содержание TS-977XU-RP

























































Результаты поиска

Содержание TS-977XU-RP

Отзывы:

Похожие инструкции для TS-977XU-RP

Бренды по названию

Популярные бренды

QNAP TS-977XU-RP, Руководство пользователя

Результаты поиска

Содержание TS-977XU-RP

Отзывы:

Похожие инструкции для TS-977XU-RP

Бренды по названию

Популярные бренды