manualshive.com logo in svg

QNAP TS-859 Pro+, Руководство пользователя, Страница: 166 / 242

Поделиться
Скачать
QNAP TS-859 Pro+ Скачать руководство пользователя страница 166

 166 

 

 

Behaviour of the UPS feature of the NAS: 

In case of power loss and power recovery, the events will be logged in the “System 
Event Logs”. 
 
During a power loss, the NAS will wait for the specified time you enter in “UPS 
Settings” before going into the standby mode or powering off. 
If the power is recovered before the end of the waiting time, the NAS will remain in 
operation and cancel its power-off or standby action.    If the power does not recover 
after the waiting time, the NAS will power off or go into standby mode. 
 
Once the power recovers: 

z

 

If the NAS is in standby mode, it will resume to normal operation. 

z

 

If the NAS is powered off, it will remain off.   

 

Comparison of the standby mode and the power-off mode 

Mode Advantage 

Disadvantage 

Standby mode 

The NAS resumes after 
power recovery. 

If the power outage lasts 
until the UPS is turned off, 
the NAS may suffer from 
abnormal shutdown. 

Power-off mode 

The NAS will be shut down 
properly. 

The NAS will remain off after 
the power recovery.   
Manual power on of the 
server is required. 

 
If the power recovers after the NAS has been shut down and before the UPS device 
is powered off, you may use the Wake on LAN feature to power on the NAS (if your 
NAS and UPS device both support Wake on LAN and Wake on LAN is enabled on the 
NAS). 
 
If the power recovers after both the NAS and the UPS have been shut down, the NAS 
will react according to the settings in “System Administration” > “Power 
Management”.  

Содержание TS-859 Pro+



















































































































































































































































Отзывы:

Нет отзывов