QNAP TS-859 Pro+, Руководство пользователя, Страница: 124 / 242

124
To set up your network surveillance system by NAS, follow the steps below:
1.
Plan your home network topology
2. Set up the IP Cameras
3. Configure the camera settings on NAS
4. Configure your NAT router (for remote monitoring over the Internet)
1. Plan your home network topology
Write down your plan of the home network before starting to set up the surveillance
system. Consider the following when doing so:
i. The IP address of NAS
ii. The IP address of the cameras
Your computer, the NAS, and the IP cameras should be installed to the same router
in LAN. Assign fixed IP addresses to the NAS and the IP cameras. For example,
y
The LAN IP of the home router: 192.168.1.100
y
Camera 1 IP: 192.168.1.10 (fixed IP)
y
Camera 2 IP: 192.168.1.20 (fixed IP)
y
NAS IP: 192.168.1.60 (fixed IP)