QNAP TS-433 Скачать руководство пользователя страница 29

Страница: 29 / 51

LED

Status

Description

System Status

Flashes green and red

alternately every 0.5

seconds

• The drive is being formatted.

• The device is being initialized.

• The operating system is being updated.

• RAID rebuilding is in progress.

• Online RAID Capacity Expansion is in progress.

• Online RAID Level Migration is in progress.

Red

• The drive is invalid.

• The disk volume has reached its full capacity.

• The disk volume is about to reach its full capacity.

• The system fan is not functioning.

• An error occurred when accessing (read/write) the

data.

• A bad sector is detected on the hard drive.

• The device is in degraded read-only mode (two

member drives failed in RAID 5 or RAID 6 but the data

can still be read).

• A hardware self-test error occurred.

Flashes red every 0.5

seconds

The device is in degraded mode (one member drive failed

in RAID 1, RAID 5, or RAID 6).

Flashes green every 0.5

seconds

• The device is not configured.

• A drive is not formatted.

Green

The device is ready.

Off

• All drives are in standby mode.

• The device is powered off.

LAN

Orange

A network connection has been established.

Flashes orange

The device is being accessed from the network.

Off

The device is not connected to a network.

Drive

Flashes red

The data is being accessed and a read/write error occurs

during the process.

Red

A drive read/write error occurred.

Flashes green

Data is being accessed.

Green

The drive is ready.

Off

No drive was detected.

TS-433 User Guide

Basic Operations

Содержание TS-433




















































Результаты поиска

Содержание TS-433

Отзывы:

Похожие инструкции для TS-433

Бренды по названию

Популярные бренды

QNAP TS-433, Руководство пользователя

Результаты поиска

Содержание TS-433

Отзывы:

Похожие инструкции для TS-433

Бренды по названию

Популярные бренды