QNAP TS-401T Turbo Server, Руководство пользователя

Страница: 30 / 145

- 30 -
Chapter 6 Administer TS-401T
When you have installed TS-401T and connected it to the network or PC, you can
manage the server via web browser. It is recommended to use Microsoft Internet
Explorer 6.0 or above to access TS-401T.
Note: Windows 98 supports Internet Explorer 6.0 or above only.
TS-401T Network Configuration for the First Time of Use
By factory default, TS-401T will search the network via DHCP (Dynamic Host
Configuration Protocol) to detect IP address settings automatically. If your
network does not support DHCP protocol, TS-401T will use the default settings as
below:
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
When TS-401T boots up, the LCD panel will display current IP address settings.
If your network does not support DHCP protocol, you must configure your TS-
401T to proper LAN settings before using it for the first time. If you are not sure
about the LAN settings, please contact your network administrator.
You can change the network settings of TS-401T by the following ways:
1.
Use the LCD panel to change the network settings. For more information,
please refer to Chapter 3. OR
2. Use Quick Install Wizard in the CD-ROM to change the network settings. For
more information, please refer to Chapter 4.