Note
This process applies only to the TS-832XU and TS-1232XU. For details on the TS-432XU,
go to
Installing Expansion Cards on TS-432XU
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1.
Check the expansion cards and brackets supported by your model on the QNAP website.
a.
Go to
.
b.
Click
Search by NAS
.
c.
Specify the number of bays and the specific model of your NAS.
d.
Under
Category
, select the component or device type.
e.
Locate a specific component or device model in the list.
f.
Optional: Click the corresponding
Note
icon to view more information.
2.
Power off the NAS.
3.
Disconnect the power cord from the electrical outlet.
4.
Disconnect all cables and external attachments.
5.
Remove the top cover.
a.
Loosen the two screws on the back of the top cover.
b.
Slide the top cover back using the handle.
c.
Lift the top cover up.
TS-x32XU User Guide
Installation and Configuration
24
