Installing Expansion Cards
Installing Expansion Cards on TS-432XU
For details on supported expansion cards, go to
.
Note
This process applies only to the TS-432XU. For details on the TS-832XU and TS-1232XU,
go to
Installing Expansion Cards on TS-832XU or TS-1232XU
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1.
Check the expansion cards and brackets supported by your model on the QNAP website.
a.
Go to
.
b.
Click
Search by NAS
.
c.
Specify the number of bays and the specific model of your NAS.
d.
Under
Category
, select the component or device type.
e.
Locate a specific component or device model in the list.
f.
Optional: Click the corresponding
Note
icon to view more information.
2.
Power off the NAS.
3.
Disconnect the power cord from the electrical outlet.
4.
Disconnect all cables and external attachments.
5.
Remove the top cover.
a.
Remove the screws connecting the top cover to the chassis.
b.
Lift the top cover up.
TS-x32XU User Guide
Installation and Configuration
20
