background image

 

91 

section must be in a format that is publicly documented (and with an implementation 
available to the public in source code form), and must require no special password or key 
for unpacking, reading or copying. 
 
7. Additional Terms. 
“Additional permissions” are terms that supplement the terms of this License by making 
exceptions from one or more of its conditions. Additional permissions that are applicable to 
the entire Program shall be treated as though they were included in this License, to the 
extent that they are valid under applicable law. If additional permissions apply only to part 
of the Program, that part may be used separately under those permissions, but the entire 
Program remains governed by this License without regard to the additional permissions. 
 
When you convey a copy of a covered work, you may at your option remove any additional 
permissions from that copy, or from any part of it. (Additional permissions may be written 
to require their own removal in certain cases when you modify the work.) You may place 
additional permissions on material, added by you to a covered work, for which you have or 
can give appropriate copyright permission. 
 
Notwithstanding any other provision of this License, for material you add to a covered work, 
you may (if authorized by the copyright holders of that material) supplement the terms of 
this License with terms: 
 
a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 
of this License; or 
b) Requiring preservation of specified reasonable legal notices or author attributions in that 
material or in the Appropriate Legal Notices displayed by works containing it; or 
c) Prohibiting misrepresentation of the origin of that material, or requiring that modified 
versions of such material be marked in reasonable ways as different from the original 
version; or 
d) Limiting the use for publicity purposes of names of licensors or authors of the material; 
or 
e) Declining to grant rights under trademark law for use of some trade names, trademarks, 
or service marks; or 
f) Requiring indemnification of licensors and authors of that material by anyone who 
conveys the material (or modified versions of it) with contractual assumptions of liability to 
the recipient, for any liability that these contractual assumptions directly impose on those 
licensors and authors. 
All other non-permissive additional terms are considered “further restrictions” within the 

Содержание TS-251+


































































































Отзывы: