Replacing Memory Modules
The NAS has two memory slots. You can increase the memory capacity of the NAS by upgrading the
memory modules. When using multiple modules, use only QNAP modules of the same type and capacity to
maintain system performance and stability. You can purchase QNAP memory modules from authorized
resellers.
Important
When replacing modules, ensure that a module is always installed in slot 1.
For details on slot numbering, see
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1.
Power off the NAS.
2.
Disconnect the power cord from the electrical outlet.
3.
Disconnect all cables and external attachments.
4.
Remove the top cover.
a.
Loosen the two screws on the back of the top cover.
b.
Slide the cover away from the NAS using the handle.
c.
Lift the top cover up.
TS-x63XU User Guide
Installation and Configuration
23
