QNAP TS-1263XU Скачать руководство пользователя страница 37

Страница: 37 / 50

LED

Status

Description

USB

Flashes blue every 0.5 sec

• A USB device (connected to the front USB port) is

detected.

• A USB device (connected to the front USB port) is

being removed from the NAS.

• A USB device (connected to the front USB port of the

NAS) is being accessed.

• Data is being copied to or from a USB or eSATA

device.

Blue

A USB device is detected in the front USB port.

Off

• No USB device is detected.

• The NAS has finished copying data to or from the USB

device connected to the front USB port.

Beep Alarm

Duration

Frequency

Description

Short beep (0.5 seconds) 1

• The NAS is starting up.

• The NAS is shutting down (software shutdown).

• The user pressed the Reset button.

• The operating system was updated.

The user tried to copy the NAS data to the external
storage device from the front USB port, but the data
cannot be copied.

Long beep (1.5 seconds) 3 (every 5 minutes)

The system fan is not functioning.

• The disk volume is about to reach its full

capacity.

• The disk volume has reached its full capacity.

• The drives are in degraded mode.

• The user started the drive rebuilding process.

• A drive is plugged in or out.

• The NAS was powered off by force shutdown

(hardware shutdown).

• The NAS was powered on successfully and is

ready.

TS-x63XU User Guide

Basic Operations

Содержание TS-1263XU



















































Результаты поиска

Содержание TS-1263XU

Отзывы:

Похожие инструкции для TS-1263XU

Бренды по названию

Популярные бренды

QNAP TS-1263XU, Руководство пользователя

Результаты поиска

Содержание TS-1263XU

Отзывы:

Похожие инструкции для TS-1263XU

Бренды по названию

Популярные бренды