QNAP TS-1263XU Скачать руководство пользователя страница 36

Страница: 36 / 50

LED

Status

Description

System Status

Flashes green and red
alternately every 0.5
seconds

• The drive is being formatted.

• The NAS is being initialized.

• The operating system is being updated.

• RAID rebuilding is in progress.

• Online RAID Capacity Expansion is in progress.

• Online RAID Level Migration is in progress.

Red

• The drive is invalid.

• The disk volume has reached its full capacity.

• The disk volume is about to reach its full capacity.

• The system fan is not functioning.

• An error occured when accessing (read/write) the data.

• A bad sector is detected on the hard drive.

• The NAS is in degraded read-only mode (two member

drives failed in RAID 5 or RAID 6 but the data can still
be read).

• Hardware self-test error

Flashes red every 0.5
seconds

The NAS is in degraded mode (one member drive failed in
RAID 1, RAID 5, or RAID 6).

Flashes green every 0.5
seconds

• The NAS is starting up.

• The NAS is not configured.

• A drive is not formatted.

Flashes green every 2
seconds

The NAS is in S3 sleep mode.

Green

The NAS is ready.

Off

All drives are in standby mode.

LAN

Orange

A read/write error occured while another device is
accessing data.

Flashes orange

The NAS is being accessed from the network.

Drive

Flashes red

The data is being accessed and a read/write error occurs
during the process.

Red

A drive read/write error occured.

Flashes green

The data is being accessed.

Green

The drive can be accessed.

TS-x63XU User Guide

Basic Operations

Содержание TS-1263XU



















































Результаты поиска

Содержание TS-1263XU

Отзывы:

Похожие инструкции для TS-1263XU

Бренды по названию

Популярные бренды

QNAP TS-1263XU, Руководство пользователя

Результаты поиска

Содержание TS-1263XU

Отзывы:

Похожие инструкции для TS-1263XU

Бренды по названию

Популярные бренды