LEDs
LED
Status
Description
System Status
Flashes green and red alternately every
0.5 seconds
• The drive is being formatted.
• The JBOD is being initialized.
• The operating system is being
updated.
• RAID rebuilding is in progress.
• Online RAID Capacity Expansion is in
progress.
• Online RAID Level Migration is in
progress.
Red
• The drive is invalid.
• The disk volume has reached its full
capacity.
• The disk volume is about to reach its
full capacity.
• The system fan is not functioning.
• An error occured when accessing
(read/write) the data.
• A bad sector is detected on the hard
drive.
• The NAS is in degraded read-only
mode (two member drives failed in
RAID 5 or RAID 6 but the data can
still be read).
• A hardware self-test error occurred.
• The system temperature is over 65°C.
• One or more power supply units are
abnormal.
Flashes red every 2 seconds
The JBOD is in degraded mode (one
member drive failed in RAID 1, RAID 5,
RAID 6).
Flashes red once
The JBOD received a command from a
remote control.
Flashes green every 2 seconds
• The JBOD is not configured.
• A drive is not formatted.
Green
The JBOD is ready.
Off
• All drives are in standby mode.
• The JBOD is turned off.
QNAP JBOD Enclosure - TL-R1220Sep-RP/TL-R1620Sep-RP User Guide
Basic Operations
28
Содержание TL-R1220Sep-RP
Страница 1: ...JBOD Enclosure TL R1220Sep RP TL R1620Sep RP User Guide Document Version 1 25 11 2020 ...
Страница 3: ...CE Notice 41 FCC Notice 41 VCCI Notice 41 BSMI Notice 42 SJ T 11364 2006 42 2 ...
Страница 21: ...QNAP JBOD Enclosure TL R1220Sep RP TL R1620Sep RP User Guide Hardware Installation 20 ...
Страница 23: ...QNAP JBOD Enclosure TL R1220Sep RP TL R1620Sep RP User Guide Hardware Installation 22 ...