Installing QVP using an HDMI connection
Warning
Installing QVP deletes all data on the drives. Back up your data before proceeding.
1. Connect an HDMI display to the device.
2. Connect a USB keyboard to the device.
3. Connect the device to the network switch or router that your cameras are connected to.
Note
For more details, see "Adding Cameras" in the
.
4. Power on the device.
The Welcome screen of the Smart Installation Guide appears.
5. Select Start Smart Installation Guide.
The disk configuration screen appears.
6. Select disks for creating a storage pool.
7. Click Next.
8. Select the RAID type.
9. Click Next.
10. Review the settings.
11. Click Next.
The Confirm screen appears.
Warning
Clicking Next deletes all data on the drive before installation starts.
12. Click Next.
QVP is installed.
Note
The QVP installation may take up to 20 minutes to complete.
QVP-x1C User Guide
Installation and Configuration
27
