•
Connecting the device to a computer
•
Connecting the device to a network
Connecting the device to a computer
Connecting QVP-x1C series devices to a QNAP NAS allows you to expand storage capacity and back up data
to the NAS through Ethernet cable connections on the device. However, you must connect the QVP-x1C
series device to a computer to configure device settings.
1. Power on the device.
2. Connect the device to a computer.
a. Connect an Ethernet cable to the device.
b. Connect the Ethernet cable to a Gigabit Ethernet port on the computer.
3. Verify that the device is recognized by the computer.
a. Open Qfinder Pro on the host computer.
Note
To download Qfinder Pro, go to
https://www.qnap.com/utilities
.
b. Locate the device on the list.
Connecting the device to a network
You can connect QVP-x1C series devices to a local area network through the host port.
1. Power on the device.
2. Connect the device to your local area network.
3. Run Qfinder Pro on a computer that is connected to the same local area network.
QVP-x1C User Guide
Installation and Configuration
24