QNAP QHora-301W, Руководство пользователя

Страница: 13 / 68

3. Installation and Access
This chapter provides specific hardware installation and router access steps.
Installation Requirements
Category Item
Environment • Room temperature: 0˚C to 40˚C (32˚F to 104˚F)
• Non-condensing relative humidity: 5% to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
• Flat, anti-static surface without exposure to direct sunlight, liquids,
or chemicals
Hardware and peripherals Network cable
Tools Anti-static wrist strap
Setting Up the Router
1. Place your router in an environment that meets the requirements.
For details, see Installation Requirements .
2. Power on the router.
For details, see Rear Panel .
3. Check if the power LED and system status LED are green.
For details, see LEDs .
4. Connect the router to the network and the computer.
For details, see Connecting the Router to the Internet .
5. Check if the WAN interface LED is orange and LAN interface LED is green.
For details, see LEDs .
6. Log on to QuRouter with the local account credentials or QNAP ID.
For details, see Binding the Router with a QNAP ID .
Connecting the Router to the Internet
1. Connect the power cord to the electrical outlet.
2. Power on the router.
3. Connect the router to the Internet.
a. Connect the router to WAN interface.
b. Connect an Ethernet cable to the 1 GbE port 1 interface on the router.
c. Connect the Ethernet cable to the Ethernet port of the ISP gateway.
QHora-301W User Guide
Installation and Access 12