QMS Magicolor, Руководство пользователя

Страница: 353 / 446

Color Jobs (or Portions of Jobs) Print in Monochrome
■
Make sure you have enough RAM installed for the job you
are trying to print.
See appendix B, “Technical Specifications,” for a chart
showing RAM requirements for different page sizes and
numbers of colors.
■ If you’re printing legal-sized pages, note that there are
different imageable areas for black and color printing. See
“Media Handling” section of Appendix B, “Technical
Specifications.”
Colors Not Registering Properly
■ Check to make sure the printer is on a hard, level surface.
■
Check for damage to the OPC belt cartridge. Replace it if
necessary.
Smudges on the Back of Pages
■ Make sure the size key on the media cassette is set to the
right size for each job. Smudges can occur if the wrong
size was selected on the previous job causing the image to
print off the side of the page onto the transfer roller. If this
happens, run a few more pages through the printer to clean
off the remaining toner.
Dark Vertical Lines
■
Check the OPC belt cartridge. Something may be caught
under the cleaning blade or the cartridge may need to be
replaced. Install a new OPC belt cartridge.
Chapter 9
T r o u b l e s h o o t i n g 9 - 3 1