QMS Magicolor, Руководство пользователя

Страница: 144 / 446

characters. The options are CR=CR, LF=LF;
CR=CR+LF, LF=LF; CR=CR, LF=CR+LF; CR or
LF=CR+LF. The factory default is CR=CR, LF=LF.
Point Size
x100 Identifies the point size in hundredths and is selectable
in increments of 25. The minimum value is 25, the
maximum is 99975, and the default is 1200.
Retain
Temporary Allows you to choose whether or not to retain
temporary PCL 5C macros and fonts at the end of each
print job. The options are on (save the temporary
macros and fonts) and off (temporary fonts and macros
are deleted at the end of each job). The default value is
off.
Scalable
Fonts Specifies whether to enable or disable the printing of
PCL 5 scalable fonts. The choices are enable (the
factory default) and disable. When you enable this
option and print PCL 4 documents, PCL 5 may
substitute scalable fonts that could cause your PCL 4
documents to print incorrectly. When this option is
disabled, fonts are bitmapped. This option is designed
to be used for PCL 4 documents that print incorrectly
under PCL 5.
Default
Font IDX Sets the default font index when Select by Index is
chosen in the Default Font menu. It is a numeric value
with a minimum setting of 0, a maximum of 32767, and
default of 0.
Monochrome
GL/2 Determines whether HP-GL 2 documents are printed
in shades of gray (on) or color (off); the default is color
(off).
Default: Off
Pen Color Defaults:
Pen 0 = White
Pen 1 = Black
Pen 2 = Red
Pen 3 = Green
Pen 4 = Yellow
Pen 5 = Blue
Chapter 4
4 - 3 4 P r i n t e r C o n f i g u r a t i o n