QMS Magicolor CX, Руководство пользователя

Страница: 120 / 222

Moving the
Printer
QMS magicolor CX User's Guide 3-44
Moving the Printer
M
WARNING: The printer weighs approximately 106 lbs (48 kg) without
consumables. Do not attempt to lift it by yourself.
ACHTUNG!
Der Drucker hat ein Gewicht von ungefähr 48 kg. Bitte
versuchen Sie niemals, den Drucker alleine anzuheben oder zu
transportieren.
If there's any chance the printer may not remain level or may be jos-
tled during the move you need to do the following to protect the
printer:
n
Remove the toner and developer cartridges (see “Replacing a
Toner Cartridge” on page 6 and “Replacing a Developer Car-
tridge” on page 10 for information on accessing these).
n
Remove the OPC belt cartridge and reinstall the pressure release
and tension release pin sets in the cartridge (see “Replacing the
OPC Belt Cartridge” on page 16 for information).
n
Remove the fuser unit and the oil bottle and drain the oil from the
unit (see “Removing the Fuser Unit and Oil Bottle” on page 45).
n
Replace the pressure-release pieces (see “Replacing Fuser-
Roller Pressure-Release Pieces” on page 47).
During the move, store the partially used toner and developer car-
tridges in their original shipping bags. If you do not have these bags,
wrap the cartridges in pieces of sturdy cloth or plastic that cannot be
harmed by loose residue. Carefully wrap the OPC belt cartridge in a
piece of dark, heavy cloth and place it in a safe place where it will not
get scratched or damaged.