QMS Magicolor 6100, Руководство по эксплуатации

Страница: 92 / 224

B
'$
“Media Sources” on page 3-30
“Options” on page 3-30
“Current Memory Configuration” on page 3-31
“Hard Disk Status” on page 3-32
“Timeouts” on page 3-33
You can view this information to see the status of the printer, but you can change it
only by accessing the printer’s configuration menu through the printer control panel, a
remote or local console, or CrownAdmin.
This table provides you with data relative to the settings of the printer.
Compatibility Level Identifies the PostScript emulation level.
Configuration Menu: No equivalent
Do Startup Page Identifies whether the printer startup page is turned on or off.
Configuration Menu: Administration/Startup Options/Do Start Page
Do Error Handler Identifies whether the PostScript Error Handler is loaded into memory
when the printer is turned on. Error Handler is a diagnostic tool that
identifies PostScript errors encountered during a print job.
Configuration Menu: Administration/Startup Options/Do Error Handler
Do Sys/Start Identifies whether the printer controller checks the hard disk for a
PostScript file named Sys/Start and then executes the file. This file does
not print.
Configuration Menu: Administration/Startup Options/Do
Sys/Start
Is Password 0?
Identifies whether the Administration menu password is set.
0=On
Configuration Menu: Installation/Use Admin Pwd
Duplex
Identifies whether the duplex option is Off or On.
Configuration Menu: Operator Control/Duplex/Off