QMS Magicolor 6100, Руководство по эксплуатации

Страница: 96 / 224

B
''$
B2 "
This hotlink provides the status of the hard disk.
Emulation
Shows the size (in KB) of the Emulation client, also known as K Mem
Emulation. This client is used to store any optional emulations, such as
LN03 Plus.
Configuration Menu: Administration/Memory/Manual Config/K Mem
Emulation
Emulation Temporary Shows the size (in KB) of the Emulation Temporary client. This client is
used by non-PostScript emulations for storing downloaded (soft) fonts,
forms, or macros.
Configuration Menu: Administration/Memory/Manual Config/K Mem
Emul. Temp
HP Storage Pool
Shows the size (in KB of RAM) of the HP Storage Pool client dedicated
to the HP emulation interpreter, which is used to process HP emulations.
Configuration Menu: Administration/Memory/Manual Config/HP
Storage Pool
Disk Cache
Shows the size (in KB) of the Disk Cache. This memory client stores
frequently used data in system memory instead of continually storing and
retrieving it from a hard disk.
Configuration Menu: Administration/Memory/Manual Config/K Mem
Disk Cache
System Use Shows the size (in KB) of the System Use. Also known as System
Memory, this non-configurable client is the amount of RAM used to run
the printer’s operating system. It’s never increased or decreased. The
system memory subtracted from the total amount of RAM identifies the
amount of RAM available for all the other memory clients.
Configuration Menu: No equivalent
Printer Memory Shows the size (in KB) of the total amount of RAM that your printer has.
Configuration Menu: Administration/Memory/Manual Config/MB Printer
Mem
Disk(s) Provides the name, size, and free space on all attached hard disks.
Configuration Menu: No equivalent
Total Identifies the total space and free space on all attached hard disks.
Configuration Menu: No equivalent