QMS Magicolor 330, Операции

Страница: 76 / 226

-2!
.)6
stored in the System Folder within a folder titled ColorSync
Profiles.
6 Select Printer Specific Options from the General pop-up
menu. Set ICC Color Matching to Disabled. As stated before,
only one method can be used for color matching. Listed
below are the options you will need to set to use the Post-
script Level 2 color matching.
Color Rendering Dictionaries
CRD RGB Source
You have three CRD choices: Photographic, Business, and Colori-
metric. Depending on your output need, select an appropriate CRD
from this menu.
6&0
With the introduction of the magicolor 330, we have also added a
CRD RGB Source selection in the Printer Specific pop-up menu. The
CRD RGB Source allows you to pick the type of monitor you are
using. Again, you will select Apple RGB since this is a common profile
for most Macintosh monitors. This feature will allow a more accurate
screen to final output match when using this Postscript Level 2 Color
Matching option.
As you have discovered, the magicolor 330 provides a variety of color
matching options that allows you to custom tailor a specific color
matching setup for your particular needs.
The magicolor 300 allows the downloading of custom ICC profiles
that will be stored on the printer. These custom profiles can be
accessed through a PPD or a QMS-supplied driver on a per-job
basis. From the keypad, you can also set a custom profile as the
default on the printer. To view the current profiles on the
magicolor
330, access Special Pages under the Administration menu and select
Yes under CMM Profile Page.
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500