QMS Magicolor 330, Операции

Страница: 165 / 226

!
)
..
' !) ) .
= ) "
1 Turn the printer off and on again to produce a startup page.
2 Compare the serial port settings listed on the startup page to
those in your AUTOEXEC.BAT file.
3 Try the communication test again.
If a blank page ejects from the printer, the printer and the PC are
communicating. If a blank page doesn’t eject and you typed the file
correctly, refer to your DOS documentation for more information.
($ )5
&&
You can check communication between the printer selected in the
Chooser and the Macintosh by sending a file to the printer from an
application (see your application documentation for more information)
or by printing a directory, as described here:
1 Display a disk or folder window.
2 Set up page information.
a From the File menu choose Page Setup.
b Select paper size, orientation, and other necessary options.
c Choose OK.
Select Save changes.
IDLE
Online/
Offline
Put the printer back on line (the
Ready indicator lights).
IDLE
Press this
key... to... The message window
reads...
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500