QMS 3260, Быстрая настройка, Страница: 5 / 8

®
"& #'()
1 Attach the
connecting plate
to the printer
using the two
thumbscrews. 2 Firmly attach the
face-up tray to
the connecting
plate.
'(
1 Unpack the
duplexer and
make sure the
multipurpose
tray is down.
Hook the
duplexer into the
slots of the
feeder.
2 Firmly insert the
stopper on the
right side of the
duplexer into the
printer.
3 Secure the
duplexer by
hooking the
safety wire of to
the printer. 4 Plug the
duplexer cable
into the printer.
Close the
duplexer.
"& #'()
1
Unpack the
face-up tray and
its parts:
• Face-up tray
• Face-up tray
holder
• Thumbscrews
• Cutter/sup-
porter
2
Holding the
supplied cutter/
supporter
sideways, insert
it into the slot on
the lower end of
the filler panel.
3 Move the cutter/
supporter up
and down to
break the plastic
connection.
Repeat this step
to break the
other two
connections.
4 Lift up the filler
panel as shown
to remove it from
the printer.