Trademarks
The following are trademarks or registered trademarks of their respective owners.
Other product names mentioned in this manual may also be trademarks or registered
trademarks of their respective owners. Registered trademarks are registered in the
United States Patent and Trademark Office; some trademarks may also be registered in
other countries. QMS and the QMS logo are registered trademarks of QMS, Inc.
LocalTalk/Apple Computer, Inc. The ENERGY STAR™
logo/United States
Environmental Protection Agency. The ENERGY STAR emblem does not represent EPA
endorsement of any product or service. Ethernet/Xerox Corporation.
Proprietary Statement
The digitally encoded software included with your QMS 1725E Print System is
Copyrighted © 1994 by QMS, Inc. All Rights Reserved. This software may not be
reproduced, modified, displayed, transferred, or copied in any form or in any manner or
on any media, in whole or in part, without the express written permission of QMS, Inc.
Copyright Notice
This addendum is Copyrighted © 1994 by QMS, Inc., One Magnum Pass, Mobile, AL
36618. All Rights Reserved. This addendum may not be copied in whole or in part, nor
transferred to any other media or language, without the express written permission of
QMS, Inc.
O Caution: It's very important to protect the printer controller board from
electrostatic damage while performing this task. If an anti-static wrist
strap is provided in your printer option kit, attach one end of it to your
wrist and the other end to any convenient electrical ground (for example, the
bare metal chassis of equipment, as on the back of a computer, that is
plugged in but turned off). Never attach the wrist strap to any piece of
equipment with an electrical current present. Turn off all power switches
first. Plastic, rubber, wood, painted metal surfaces, and telephones are not
acceptable grounding points. The printer isn't an acceptable grounding point
either because it must be unplugged before you perform this task.
If you don't have an anti-static wrist strap, discharge your body's static
electric charge by touching a grounded surface before you handle any printer
boards or components and before removing the controller board cover.
Redischarge your body each time after walking around and before touching
the printer controller board again. Handle the tray carefully, and try to
handle it by the edges only.
