QMS 1725E, Руководство по началу работы

Страница: 60 / 94

Installing the Software
QMS 1725E Print System Getting Started 4-8
2 Change to the directory in which you want the UNIX utilities
installed.
The utilities automatically create and are installed in a
directory named QMSoft in the current directory.
» Note: This directory must be able to be mounted by all network nodes
that need to access the printer.
3 If a PC file system (PCFS) is available on the UNIX host,
mount the disk.
For information on mounting a DOS FAT-formatted disk refer
to the UNIX man page.
4 Transfer the HS_TAR image file to the UNIX host directory
where the file is to be expanded.
» Note: If the UNIX host doesn’t support PCFS, transfer the image from a
PCFS-capable device (such as a DOS system) to the UNIX system via
binary FTP.
5 In the directory in which the image file is located, expand the
tar image file by typing
tar xvf hs_tar
↵
6 Change to the newly created QMSoft directory:
cd QMSoft
↵
7 Run the Qinstall installation utility by typing
./Qinstall
↵
8 Follow the instructions on the screen. When the installation
is complete, the following message displays:
QMS UNIX Host Software installation complete
9 Copy the addprt and qpr utilities and their associated man-
ual pages to standard directories. For example,
cp addprt /usr/bin
↵
cp qpr /usr/bin
↵
cp man/addprt.1 /usr/man/man1
↵
cp man/qpr.1 /usr/man/man1
↵