QMS 1725E, Руководство по началу работы, Страница: 29 / 94

Removing Packing Materials
2-5 Setting Up Your Printer
To register by mail, fill out and send in your warranty card. To register
by telephone, in the US call QMS toll-free at (800) 637-8049. In other
countries, refer to appendix A, “QMS Customer Support,” for the
appropriate telephone number.
Removing Packing Materials
O Caution: It’s important that you remove the packing materials in the proper
order. Follow the unpacking instructions in the order given. Damage to the
printer may result if the printer is turned on before all packing materials are
removed.
The packing materials consist of several pieces of cardboard, foam,
tape, and shipping spacers. You must remove the tape and cardboard
from the inside of the paper cassettes and from the inside and outside
of your printer.
Removing the Shipping Spacers
O Caution: You could damage your printer if you operate it before removing the
shipping spacers.
The shipping spacers are the plastic pieces with orange tags inside
the printer. Remove these plastic shipping spacers before you turn on
the printer. To remove the shipping spacers, follow these steps: