.
.
QMD Install manual D06400210010G PTZ Dome Camera
34
6.4
Use External Housing
To operate speed dome cameras and maintain all functions in normal in severe
temperature conditions, i.e. below -10
o
C or above 45
o
C, external housing is
required
Inside the housing, the mounting base (item # 3 in the
accessory list) is already built before it leaves factor.
(see
picture on the right)
Installation Procedure
1.
Take the bracket
(supplied with the housing)
,
put it on the target place and fix it with the
supplied screws (total of 4)
2.
Take the cover-screw off the bracket, and
remove the cover from bracket
3.
Attach the housing and lock it to the bracket.
Tight them on with screws
4.
Put the cables in the trench of bracket, and
all connectors come out through the cable
outlet. Then put cover and screw back.
5.
Load the camera to housing from the
opening of housing. Be sure the connectors
are well mated and then rotate the camera
to lock it in position
6.
Put the safety screw
in locking position and tight it
Remove this screw
Finished device