QM-Products 2019 v1.2
9
Setup
4.2.2 “Input” page
Figure No 2
In the “Input page” ( Figure No 2) the user is able to setup each HD input
independently. There are two tabs including all the 2 HDMI inputs. For each input the
user needs to program the following fields:
1.
Input Enabled/Disabled - Enable or disable the specific HDMI input
2.
Service Name – Insert the preferred service name
3.
Service ID – Insert the service ID number
4.
Video Bitrate – Set the video bitrate (2000-19000 Kbps)
5.
Audio Bitrate – Set the audio bitrate (64,96,128,192,256,320 Kbps)
6.
Audio encoding – Set the audio encoding (AAC, AC3, Mpeg2)
7.
HDCP – Enable/disable the HDCP function
8.
LCN – Set the LCN number
9.
PMT PID – Set the PMT PID
10.
Video PID – Set the Video PID
11.
Audio PID – Set the Audio PID
Once all settings are being written, the user must click the “Apply” button for the
settings to be saved.