4 – Managing Switches
Configuring a Switch
59235-02 A
4-25
L
4.6.6
SNMP Properties
Use the SNMP Properties dialog shown in
Figure 4-11
to change SNMP
configuration parameters. After making changes, click the
OK
button to put the
new values into effect. To open the SNMP Properties dialog, choose one of the
following:
Open the faceplate display for the switch you be configuring. Open the
Switch menu and select
SNMP Properties
.
Right-click a switch graphic in the faceplate display, and select
SNMP
Properties
from the popup menu.
Figure 4-11. SNMP Properties Dialog
Note:
Since the Read Community, Trap Community, and Write Community
settings are like passwords and are write-only fields, the current
settings are displayed as asterisks.
