Qlogic SANbox 5000 Series Скачать руководство пользователя страница 29

3 – Managing Fabrics

Event Browser

59235-02 A  

3-5

L

Figure 3-1.  Events Browser

Severity is indicated in the severity column using icons as described in 

Table 3-1

.

Table 3-1. Severity Levels 

Severity 

Icon

Description

Alarm 

 an alarm is a "serviceable event". This means that attention by 

the user or field service is required. Alarms are posted asynchronously 
to the screen and cannot be turned off. If the alarm denotes that a sys-
tem error has occurred the customer and/or field representative will 
generally be directed to provide a "show support" capture of the switch. 

Critical event 

 an event that indicates a potential failure. Critical log 

messages are events that warrant notice by the user. By default, these 
log messages will be posted to the screen. Critical log messages do not 
have alarm status as they require no immediate attention from a user or 
service representative.

Warning event 

 an event that indicates errors or other conditions that 

may require attention to maintain maximum performance. Warning mes-
sages will not be posted to the screen unless the log is configured to do 
so. Warning messages are not disruptive and, therefore, do not meet 
the criteria of Critical. The user need not be informed asynchronously 

     No icon

Informative 

 an unclassified event that provides supporting informa-

tion.

Column Sorting 

Buttons

Severity 

Column

Содержание SANbox 5000 Series



































































































































Отзывы: