Qlogic QLogic 9000 Series, Руководство по установке, Страница: 80 / 168

3–Installation
Installing a Switch
3-20 59229-05 A
Configure the Switch
You can configure the switch using the Enterprise Fabric Suite 2007 application,
the QuickTools web applet, or the command line interface. To configure the switch
using Enterprise Fabric Suite 2007, click the
Open Configuration Wizard radio
button in the Initial Start dialog, then click the Proceed button. The Configuration
wizard prompts you for the network configuration information listed in Table 3-2 .
To configure the switch using the command line interface, do the following:
1. Open a command window according to the type of workstation and
connection:

Ethernet (all platforms): Open a Telnet session with the default switch
IP address and log in to the switch with account name
admin and the
default password password .
telnet 10.0.0.1
Switch Login: admin
Password: *******
Table 3-2. Network Configuration Parameters
Temporary IP address
Temporary subnet mask
Current Admin account password Factory default is password.
Archive template file
Switch domain ID (1–-239)
Domain ID Lock (Locked/Unlocked)
Switch name
Permanent IP address
Permanent subnet mask
Permanent gateway address
Permanent network discovery method
Ethernet port selection
Date and time
New Admin account password
Create a configuration archive?