Qlogic QLogic 12000 Series, Справочное руководство

Страница: 73 / 144

Switch Command Line Interface
Groups and Commands
D000103-000 E 1-65
Sample Output:
NOTES: Use this command to display the event forwarding (subscription) table in
the subnet manager. This command is not available unless the subnet manager is
in the Master mode.
smMasterLMC
Display the LMC value of the subnet manager to be used on CA ports.
Syntax:
Options:
-> smShowSubscriptions
******************************************************************
There are 2 subscriptions
******************************************************************
Subscriber GID = 0xFE80000000000000:00066A00D8000163
Subscriber LID = 0x0071
Subscriber PKey = 0xFFFF
Subscriber Start LID = 0x0001
Subscriber End LID = 0xBFFF
Subscriber Record ID = 0x00000001
Subscriber Inform Info =
GID = 0x0000000000000000:0000000000000000
Start LID = 0xFFFF
End LID = 0x0000
Is Generic? = Yes
Subscribe? = Subscribe
Type = All Types
Trap Number = 0x0040
Queue Pair Number = 0x000001
Response Time Value = 19
Producer Type = Subnet Management
******************************************************************
Subscriber GID = 0xFE80000000000000:00066A01A0007116
Subscriber LID = 0x0007
Subscriber PKey = 0xFFFF
Subscriber Start LID = 0x0001
Subscriber End LID = 0xBFFF
Subscriber Record ID = 0x00000036
Subscriber Inform Info =
GID = 0x0000000000000000:0000000000000000
Start LID = 0xFFFF
End LID = 0x0000
Is Generic? = Yes
Subscribe? = Subscribe
Type = All Types
Trap Number = 0x0043
Queue Pair Number = 0x000001
Response Time Value = 18
Producer Type = Channel Adapter
******************************************************************
There are 2 subscriptions
smMasterLMC
None.