Qlogic QLogic 12000 Series Скачать руководство пользователя страница 31

Страница: 31 / 144

Switch Command Line Interface

Groups and Commands

D000103-000 E

1-23

idleTimeoutSet

Set the UI idle timeout value.

Syntax:

Options:

Sample Output:

NOTES:

Modifies the idle timeout for the CLI or GUI interfaces. Timeouts are in

number of seconds, with zero meaning the timeout is disabled.

sessionTimeoutDisable

Disable the idle timeout for the current CLI session.

Syntax:

Options:

Sample Output:

NOTES:

Disables the idle timeout for the current CLI session. This value does not

persist across instances of the session (i.e., each time you log on, it will default back
to the system default value).

idleTimeoutSet [--all | --cli | --gui] seconds]

[seconds]

Idle timeout value (in seconds).

--all

Set the idle timeout for both the CLI and the GUI to the same value.

--cli

Set the idle timeout for the CLI. This is the default if no identifier is specified.

--gui

Set the idle timeout for the GUI.

-> idleTimeoutSet --all 700

Timeout is set to 700 seconds.

sessionTimeoutDisable

None.

-> sessionTimeoutDisable

Disabled session idle timeout.

Содержание QLogic 12000 Series

















































































































































Результаты поиска

Содержание QLogic 12000 Series

Отзывы:

Qlogic QLogic 12000 Series, Справочное руководство, Страница: 31 / 144

Результаты поиска

Содержание QLogic 12000 Series

Отзывы: