Qlogic QLE2740L-DEL, Руководство пользователя

Страница: 31 / 135

2–Driver Installation and Configuration
VMware Driver Installation and Configuration
16 BK3254601-00 C
 Adds the appropriate directive in the
modprobe.conf
file (if
applicable).
3. (Optional) Manually load the driver for Linux.
 Edit the
/etc/modprobe.d/unsupported_modules
file to make
the following change:
allow_unsupported_modules 1
(replace
0
with
1
)
 To load the driver using
modprobe
, issue the following command:
# modprobe -v qla2 xxx
 To unload the driver using modprobe, issue the following command:
# modprobe -r qla2 xxx
4. (Optional) To automatically load the driver each time the system boots,
rebuild the RAM disk to include the driver as follows:
a. Create a backup copy of the RAMDISK image by issuing the following
commands:
# cd /boot
# cp initramfs-[kernel version].img initramfs-[kernel
version].img.bak
b. Create the new RAMDISK by issuing the following command:
# dracut -f
5. To load the driver, reboot the host.
VMware Driver Installation and Configuration
This section provides the following procedures for installing drivers on a VMware
system:
 Installation Overview
 Installing the ESXi 6.5 and 6.0 U2 Fibre Channel Driver
 Installing QConvergeConsole VMware vCenter Server Plug-in
 Installing QConvergeConsole VMware vSphere Web Client Plug-in
NOTE
You can optionally complete either or both Step 3 and Step 4 of this
procedure.