background image

QLogic Corporation

Page ii

DC8151101-00  C

Information furnished in this manual is believed to be accurate and reliable. 
However, QLogic Corporation assumes no responsibility for its use, nor for any 
infringements of patents or other rights of third parties which may result from its use. 
QLogic Corporation reserves the right to change product specifications at any time 
without notice. Applications described in this document for any of these products 
are for illustrative purposes only. QLogic Corporation makes no representation nor 
warranty that such applications are suitable for the specified use without further 
testing or modification. QLogic Corporation assumes no responsibility for any errors 
that may appear in this document.

No part of this document may be copied nor reproduced by any means, nor 
translated nor transmitted to any magnetic medium without the express written 
consent of QLogic Corporation.

QLogic is a trademark of QLogic Corporation.

Seagate is a trademark of Seagate Technology, Inc.

Microsoft is a trademark of Microsoft Corporation.

All other brand and product names are trademarks or registered trademarks of 
their respective owners.

Document Revision History

Rev. A initial release, 6/22/99

Rev. B, update, 5/24/00 (QL12160L board added)

Rev. C, update, 9/14/01 (QLA12160L board deleted)

Boards Affected

QLA12160 (DC8110402)

Changes

Sections Affected

Deleted QLA12160L

All

Added 4 GB Addressing and Fast Command Posting 
to host adapter settings

A.2.1

Moved SCSI ID, SCSI bus reset, SCSI bus reset 
delay, and SCSI termination from host adapter 
settings to SCSI bus settings

A.2.1, A.2.3

Deleted Host Adapter and Concurrent Command/
Data from host adapter settings

A.2.1

© 1999–2001 QLogic Corporation

First Printed: June 1999

All Rights Reserved Worldwide.

Printed in U.S.A.

QLogic Corporation, 26600 Laguna Hills Drive, Aliso Viejo, CA 92656

(800) 867-7274 or (949) 389-6000

Get other manuals https://www.bkmanuals.com

Содержание QLA12160































Отзывы: