7
Congratulations!
You have now successfully installed your QLogic
iSR6142s and mapped the FC devices from remote SAN to local SAN.
Refer to "Performance Tuning" in the
iSR6142 Intelligent Storage Router Installation Guide
for optimal parameter settings.
Step 10. Configure iSR6142s for Connecting FC/iSCSI Initiators to
FC/iSCSI Targets
Using the graphical user interface (GUI)
Run the Map Local Initiator/Target Wizard to establish connection between devices:
1.
Select the initiator device (FC or iSCSI).
2.
Select a target device.
3.
If you selected an iSCSI initiator, select the FC port on which this initiator is to be presented. The FC WWPN
for this iSCSI initiator is automatically assigned. It is not recommended to change the assigned FC WWPN
for this initiator.
4.
Select the target presentation port and iSCSI target name. The screen displays the device mapping
information.
5.
Verify the information before confirming.
Using the command line interface (CLI)
, run the
localmap add
command to map an FC or iSCSI initiator to an FC
or iSCSI target.
For details, refer to the
iSR6142 Command Line Interface (CLI) User’s Guide
.
Congratulations!
You have now successfully installed your QLogic
iSR6142 and mapped your iSCSI/FC servers to iSCSI/FC storage.
