FC0054605-00 A
6-1
6
Presentation of LUNs to a
Virtual Adapter Port
This section describes, at a high level, how to present LUNs to a virtual adapter
port. For detailed step-by-step instructions, please refer to documentation from
your storage array vendor.
The following example uses the EMC CX3-20 Fibre Channel storage array
managed via EMC Navisphere
®
.
1.
Check the zoning on the Fibre Channel switch to ensure that the newly
created virtual port has access to the storage array.
2.
Locate the virtual adapter port that has logged into the storage array (see
Figure 6-1
).
Figure 6-1. Navisphere—Locate the Virtual Adapter Port
