Qlogic Data Migration Service, Руководство пользователя

Страница: 63 / 162

3–Using DMS
Using the Verify Migration Job Wizard
ISR654606-00 A 3-35
Click Schedule for Later , and then enter a Start Time and Start
Date .
Click Serial Schedule Jobs , and then assign a priority (1–256)
in the Job Priority box, where a lower value indicates that the
job is scheduled earlier than jobs configured with higher values.
For details on
Serial Schedule Jobs , see “Starting Serial
Scheduled Jobs” on page 3-18 .
Click Configure Only to configure the migration job without any
start time or priority. You may start this job at a later time. (To
start the job, select it and then click
Start , or from the active job
pane, right-click the job and then click Start .)
b. In the Group Name box, select a job group name from the list. The
group name makes it easier to view the job status on a group basis.
c. In the IO Size box, either select one of the default I/O sizes, or enter a
custom value.
Figure 3-15 Verifying Jobs Options Dialog Box
d. To save the verifying jobs options, click Apply . Or, to abandon
changes to this job verification, click Cancel .
5. Add the source and destination LUN. For details, see “Using the Data
Migration Wizard” on page 3-7 .