Qlogic Data Migration Service, Руководство пользователя

Страница: 27 / 162

2–Getting Started
Hardware and Software Setup
ISR654606-00 A 2-7
To set up the hardware for DMS:
1. To manage the MPX200, install the HP StorageWorks mpx Manager
software on any computer running Windows 2003, Windows 2008, or
Windows XP. The MPX200 must be accessible over the network connection
from the machine on which HP StorageWorks mpx Manager is installed.
2. Set up the MPX200 management port IP address. For details, refer to the
HP StorageWorks MPX200 Multifunction Router Quick Start Guide .
3. Connect the storage array (source and destination) controller ports to an
Fibre Channel switch. For a high availability (HA) topology, connect the two
ports of each array on two different switches.
4. Ensure that the controller ports are seen as online on the Fibre Channel
switches.
5. Connect the Fibre Channel ports of the MPX200 to the Fibre Channel
switches where the array controller ports are connected. For an HA
topology, connect each Fibre Channel port of the MPX200 to a different
Fibre Channel switch.
6. Ensure that the MPX200 Fibre Channel ports are seen as online on the
Fibre Channel switches.
Software Setup
Software setup for DMS includes configuring switch zoning and LUN presentation.
Zoning: Perform zoning on the Fibre Channel switches such that array
controller ports are visible to the MPX200, and the array is able to see
MPX200 Fibre Channel ports and can present LUNs to the MPX200.
LUN Presentation: Ensure the appropriate data LUNs are presented from
the storage arrays to the MPX200.
NOTE:
For HA configurations where the source or destination LUNs are visible from
both MPX200 ports, make sure that both MPX200 ports are configured
under a single host or host group entity in the array management software.
This ensures that both MPX200 ports see the same set of LUNs as having
the same LUN ID. Failure to do so can lead to unpredictable and erroneous
behavior.