7–Installing Management Applications
Detailed Procedures
68
83840-546-00 D
15.
Right-click on the certificate, and then select
Properties
to open the
MGMTAPP-LAB3 Properties dialog box (
Figure 7-1. MGMTAPP-LAB3 Dialog Box
16.
Ensure that only
Server Authentication
is enabled, as shown in the figure.
17.
Open
Trusted Root Certification Authorities
and then open
Certificates
.
18.
Follow the instructions from
Configure WinRM HTTPS/SSL on the Server
1.
Create WinRM Listener, as follows:
a.
Click
Start
(or press the Windows logo key) and select
Run
.
b.
Enter
MMC
and click
OK
.
c.
Select the self-signed certificate from the Personal store.
NOTE
“Perform HTTPS Configuration (if you plan to use HTTPS)” on page 72
for instructions on importing the self-signed certificate on a client.
